Please note: The scientific program is subject to change.
The scientific programme is organized around two complementary thematic tracks, bringing together advances in manufacturing technologies with the digital, intelligent and human-centered transformation of industry.
Sessions coded AMT address Additive Manufacturing Technologies, including process development, materials, design for additive manufacturing, metal and polymer systems, biomedical applications, post-processing, sustainability and industrial implementation.
Sessions coded DI5 address Digital Industry 5.0, including artificial intelligence, machine learning, digital twins, IoT, intelligent manufacturing, robotics, cybersecurity, digital healthcare, human-centered systems and sustainable digital transformation.
Sessions have been arranged according to the registered attendance mode of the presenting authors. Presenters attending in person are scheduled on 3 and 4 September in the physical conference halls; presenters attending online are scheduled in the virtual halls on 5 September.
Presentation format: 10 minutes presentation + 2 minutes questions and transition per paper
Session format: 4 to 5 papers × 12 minutes = ~60 minutes
| Date | AMT | DI5 | Total |
|---|---|---|---|
| 3 September | 24 | 14 | 38 |
| 4 September | 20 | 12 | 32 |
| 5 September | 25 | 44 | 69 |
| TOTAL | 69 | 70 | 139 |
| Track | Sessions | Papers |
|---|---|---|
| Additive Manufacturing Technologies (AMT) | 16 | 69 |
| Digital Industry 5.0 (DI5) | 16 | 70 |
| TOTAL | 32 | 139 |
| Time | Programme |
|---|---|
| 09:00 – 10:00 | Registration |
| 10:00 – 11:30 | Opening Ceremony |
| 11:30 – 12:15 | Invited Talk — Prof. Ziad Melhem |
| 13:00 – 13:50 | Lunch Break |
| 14:00 – 14:20 | Invited Talk — Asst. Prof. Dr. Ruslan Melentiev |
| 14:20 – 15:20 | Parallel Scientific Sessions I |
| 15:20 – 15:40 | Coffee Break |
| 15:40 – 16:40 | Parallel Scientific Sessions II |
| 16:40 – 17:40 | Daily Announcements |
| 18:30 – 21:30 | Opening Dinner & City Tour |
| ID | Title | Authors |
|---|---|---|
| 235 | Effect of Cold Isostatic Pressing on the Mechanical Behavior of 3D-Printed PLA/GF Composites | Mutlu Karasoglu, Mustafa Burak Saganer |
| 305 | Investigation of the Effects of Layer Thickness and Infill Density on the Hardness and Density of 3D-Printed PLA Specimens | Okan GÜL |
| 233 | Towards Sustainable Plastic Gears: A Review of Biodegradable Polymer Materials | Marah A. Elsiedy, Fehim Findik, Hesham A. Hegazi |
| 307 | Mechanical Response of Continuous-Fiber Honeycomb Structures Enhanced by Silicone-Assisted Hot Isostatic Pressing Consolidation | Altuğ Uşun, Hamdi Kuleyin, Recep Gümrük |
| 310 | Fabrication and Interfacial Characterization of a Functionally Graded Ti Grade 23/Ti Grade 4 Structure Produced by Selective Laser Melting | Temel Varol, Hüseyin Can Aksa, Serhatcan Berk Akçay, Oğuzhan Çuvalcı, Seda Genç, Eda Genç |
| ID | Title | Authors |
|---|---|---|
| 314 | Friction Stir Welding of Additively Manufactured AlSi10Mg and Conventional 5754-H111 Plates | Mehtap Hidiroglu, Melis Turksever |
| 318 | Low-Energy Impact Behavior of Glass Fiber-Reinforced Polymer Composites Produced by Vat Photopolymerization | Kutay Çava, Serdar Emir Yılmaz, Mustafa Aslan, Altuğ Uşun, Hüseyin İpek |
| 249 | The Role of Liquid Environment Exposure on the Tribological Behavior of Polymers Manufactured by FDM | Muhammet Anıl KAYA, Cengiz Görkem DENGİZ, Hasan ÇİÇEK |
| 263 | Effect of Raster Angle and Abrasive Flow Machining Parameters on Surface Integrity of Additively Manufactured PLA Components | OMER EYERCIOGLU, Mehmet Ali AKELOGLU |
| 335 | Surface Modification of SLM-Fabricated AlSi10Mg Lattice Structures by Chemical Polishing | Yiğithan DUYMAZ, Mustafa Safa YILMAZ, Mehmet Mert KOTAMAN, Ahmet ONAYLI |
| ID | Title | Authors |
|---|---|---|
| 338 | An Empirical and Machine Learning Approach to Surface Roughness Prediction in Turning | Pinar Demircioglu, Ismail Bogrekci, Orcun Akarca |
| 304 | Digital Twin-Driven Autonomous Process Optimization in Large-Format Additive Manufacturing via Proximal Policy Optimization | Sinan Keskin, OMER EYERCIOGLU |
| 362 | Experimental Development of an Adaptive Temperature-Controlled Digital Water Heater under Variable Inlet Conditions Using AHP-TOPSIS-Based Conceptual Design Selection | Hakan MADEN, Bilal ÖZSARIKAYA |
| 241 | Speed-Sweep Characterization of a 3D-Printed Dual-Disc Cycloidal Drive: Vibration and DC Input Profiles | Kerim Deniz KAYA, Semih YILMAZ, Kubilay BAYRAMOĞLU |
| 311 | Surface Roughness Enhancement of Downskin Surfaces in IN718 LPBF Parts Through Parameter Optimization | Ömer Faruk Yazici |
| ID | Title | Authors |
|---|---|---|
| 328 | Real-Time Failure Notification System for Metal Additive Manufacturing via LoRaWAN Mesh Topology | Oguz Alper ISEN, Emin CANTEZ, Melis TURKSEVER DAYAL |
| 258 | Using the Solid Object-Oriented Principles to Design Intelligent Manufacturing Systems | Gábor Kusper, Gergely Kovásznai |
| 251 | Ensuring Airtightness in FDM-Printed Soft Robots | Burak Özpay, Ahmet Demir, Mustafa Aydın, Mehmet Mert İlman |
| 315 | Use of additive manufacturing in unmanned underwater vehicles | Efe KURU, Melis TÜRKSEVER |
| 253 | QoS-Aware Data Transmission Model for Cloud-Based 3D Printing Systems | Pavlo Pustovoitov, Svitlana Kantsyrieva, Yevhen Brusov, Volodymyr Kompaniiets, Maksym Okhrymenko |
| ID | Title | Authors |
|---|---|---|
| 300 | Manufacturing Large-Scale Polymer-Based Products in Sections and Assembling Them using Polyurethane Filler Materials | AHMET KÖBELOĞLU, KERİM ÇETİNKAYA, SUAT ALTUN |
| 236 | Response Surface Optimization of 3D Freeze Printing Process | Erim ÖZDEN, Halil TETİK |
| 240 | Optimization of Printing Parameters in Direct Ink Writing of Soft Elastomers | Ege Göktaş, Halil Tetik |
| 373 | A Review of Residual Stress Formation and Reduction Strategies in FDM/FFF Polymer Additive Manufacturing | Mehtap Köse Moran |
| ID | Title | Authors |
|---|---|---|
| 245 | Rheological Characterization and Printability of Pea Protein-Based Inks for Extrusion-Based 3D Food Printing | Emirhan Atlayan, Irem Tuzun, Berkay Berk, Elif Çavdaroglu, Sevcan Unluturk, Mehmet S. Unluturk |
| 260 | Crushing Performances of 3D-Printed Metal Circular Tubes: Evaluating the Impact of Multi-Laser Systems | Cenk Kilicaslan, Doğuş Zeren |
| 320 | Effect of Moisture Control on Mechanical Strength in Additive Manufacturing Using Machine Learning | Arda PAZARCIKCI, Sema ÇAYIR, Bekir AKSOY, Koray ÖZSOY |
| 250 | Effect of Electrophoretic Deposition Strategies on the Structural Development of Cu-Doped ZnO Coatings on WAAM-Fabricated Super Alloy | Doruk Gürkan, Utku Canci Matur, Özgür Yurtsever, Egemen Sulukan |
| ID | Title | Authors |
|---|---|---|
| 264 | Effect of Sintering Environment on the Electrochemical Performance of FDM-Fabricated Stainless Steel Structures | Musa YILMAZ |
| 265 | Sintered 3D-Printed Metallic Parts as Functional Electrodes in Different Electrolyte Media | Abdulcabbar Yavuz, Derya Kapusuz Yavuz, Musa Yilmaz |
| 363 | lonic-Liquid-Assisted Cobalt Electrodeposition on 3D-Printed Alloy Electrodes for Energy Storage Applications | Musa YILMAZ, Abdulcabbar YAVUZ |
| 351 | Manufacturing Process Effects on a Topology-Optimized L7 Front Strut Tower Component | Kazım SULAK, Ahmet ONAYLI, Esra GÜLER |
| ID | Title | Authors |
|---|---|---|
| 293 | Hybrid HPC Architecture: Bridging On-Premise Supercomputing and Cloud Infrastructure for Scalable Scientific Workloads | Narmin Mammadova, Elviz Ismayilov (Invited Talk) |
| 232 | Framework for Sustainable Mechanical Design Integrating Material Selection and Manufacturing Processes: An Application to Product Design | Hesham A. Hegazi, Marah A. Elsiedy, Seba M.Badran |
| 309 | ELRI Kairos: A Digital-to-Physical CAD Framework for the Hybrid Manufacturing of Monolithic TPMS Matrices | Kaan Görkem ELRİ, Raşit SEZER, Mustafa Yusuf YAZICI, Bülent ÖZTÜRK |
| 312 | A Cost-Oriented Break-Even Analysis of Additive Manufacturing and Conventional Manufacturing Methods | Melis Türksever Dayal |
| Time | Programme |
|---|---|
| 09:30 – 10:00 | Invited Talk — Prof. Moataz Atallah |
| 10:00 – 10:20 | Coffee Break |
| 10:20 – 10:45 | Invited Talk — Asst. Prof. Dr. Yahya Kara |
| 10:45 – 12:00 | Parallel Scientific Sessions III |
| 12:00 – 14:00 | Lunch Break |
| 14:00 – 14:20 | Invited Talk — Prof. Dr. Erkan Kaplanoğlu |
| 14:20 – 15:20 | Parallel Scientific Sessions IV |
| 15:20 – 15:40 | Coffee Break |
| 15:40 – 16:40 | Parallel Scientific Sessions V |
| 16:40 – 17:40 | Special Programme / Networking |
| 18:00 – 21:30 | Gala Dinner & City Tour |
| ID | Title | Authors |
|---|---|---|
| 377 | Optimizing Leakage Testing via DfAM | Ahmed Taha Camli, Omer Faruk Yazici |
| 352 | Topology Optimization of an L7 Vehicle Chassis Component | Esra GÜLER, Ahmet ONAYLI, Kazım SULAK |
| 374 | System-Level Evaluation of a Topology Optimized Planet Carrier Designed for Metal Additive Manufacturing | Baris Can Saritas, Pinar Demircioglu, İsmail Bogrekci |
| 229 | Nonlinear Acoustic Performance Assessment of TPMS-Based Porous Structures under High Sound Pressure Levels for Jet Engine Applications | Mervenur Kazancı, Oguz COLAK, Alimurtaza RUTCI, Baris Batuhan CAKMAK |
| ID | Title | Authors |
|---|---|---|
| 290 | Predicting Crack Propagation and Fracture in Ti-6Al-4V Specimens Fabricated by Electron Beam Powder Bed Fusion: Extended Finite Element Method | Bahman Paygozar |
| 375 | Mechanical Behavior and Energy Absorption of Additively Manufactured Functionally Graded Auxetic Structures for Unmanned Underwater Vehicle Hulls | Efe Kuru, Melis Turksever |
| 356 | Investigation of the Performance of S355 Material in Flow Forming Process | Pinar Demircioglu, Ismail Bogrekci, Mehmet Kose |
| 373 | CAM-Based Comparative Assessment of Conventional and Additive-Driven Hybrid Manufacturing for Aero-Engine Turbine Casings | Recep Cetin, Sercan Kucuk, Ozgur Poyraz |
| 242 | Thermal Imaging Analysis of 3D-Printed Steam Methane Reforming (SMR) Reactor at Progressive Print Stages | Semih YILMAZ, Kerim Deniz KAYA, Kubilay BAYRAMOĞLU |
| ID | Title | Authors |
|---|---|---|
| 376 | Break-Even Point Analysis for Additive Manufacturing and Traditional Manufacturing | Melis Turksever, Efe Kuru |
| 327 | An Evaluation of Digital Water Management in the Tourism Sector | Ayla Avcı, Prof. Dr. Celaleddin SERİNKAN |
| 332 | Physics-Consistent Machine Learning Analysis of Ambient-Temperature Confounding and Masked Thermodynamic Drivers in Geothermal Power Output | Ismail Bogrekci, Pinar Demircioglu, Baybars Dal, Islam Islamov |
| 280 | GYMTWIN: A Novel Approach to Personalized VR Digital Physiotherapy for Bedridden Patients | Elena Robles, Elisa Cereda, Davide Somma, Nada Khaled Mansour, Paolo Oliva |
| ID | Title | Authors |
|---|---|---|
| 339 | Numerical and Experimental Investigation of the Effects of Chemical Post-Processing on Geometry, Surface Roughness, and Pressure Drop in Additively Manufactured Internal Channels | Mehmet Mert KOTAMAN, Kazım SULAK, Ömer Faruk YAZİCİ |
| 252 | Production and Characterization of 3D Bio-Implants via Additive Manufacturing Using Personalized Tomographic Data | Ezgi Oruç, Mustafa Aydın |
| 281 | Patient-Specific 3D Models: From Cadaveric Rehearsal to Preoperative Planning in Complex Surgery | Cecilia Cappelli, Alberto Bevilacqua, Nada Mansour, Paolo Oliva |
| 367 | Additive Technologies Application in the Manufacture of Thyroid Phantoms for Ultrasound Imaging | Veronika Grebennikova, Marina Cherkasskaya, Denis Leonov, Olga Omelyanskaya |
| 278 | Biomechanical Evaluation of Ti6Al4V Lattice-Structured Cervical Interbody Fusion Cages Using Finite Element Analysis FEA under ASTM F2077 Loading Conditions | Ala Boulegane, Abderrahim Hadj larbi, Ammar Kassaa, Ahmed redha Khantoul |
| ID | Title | Authors |
|---|---|---|
| 308 | CT-Based Design and Patient-Specific Gonial Implant Fabrication for Right Mandibular Reconstruction Using Metal Additive Manufacturing | Hüseyin Can Aksa, Kutay Çava, Altuğ Uşun, Hüseyin İpek, Mustafa Aslan |
| 319 | Evaluation of Medical CT and Cone-Beam CT Scanners for Producing Patient-Specific 3D Printed Maxillofacial Models: An In Vitro Study | Saadettin Kayıpmaz, Senem Tuğra Dönmez, Ali Faruk Özyaşar, Ayşenur Bakal, Kutay Çava, Mustafa Aslan |
| 286 | Hybrid Biofabrication of Hierarchically Graded Scaffolds for Soft-to-Hard Interface Engineering | Simone Micalizzi, Luca Bertolino, Federica Potere, Francesco De Gaetano, Paolo Oliva |
| 291 | A single rotating-mandrel bioprinting strategy for small-diameter tubular constructs: from vascular grafts to a Wirsung duct training phantom | Federica Potere, Sabrina Facchinetti, Arianna Callera, Simone Micalizzi, Francesco De Gaetano, Paolo Oliva |
| ID | Title | Authors |
|---|---|---|
| 282 | Hybrid Model of Clinical Integration and Regulatory Governance in 3D Printing: A Hybrid Model for University-Based Custom-Made Device Manufacturing | Elisa Cereda, Elena Robles, Cecilia Cappelli, Nada Khaled Mansour, Paolo Oliva |
| 239 | Perceptions of Pre-Service Mathematics Teachers Toward Artificial Intelligence: A Mixed-Methods Study | Ayça Akın, Selçuk Alkan, Zübeyde Er, Adem Şimşek, Hüsnü Berat Yıldırım |
| 284 | The Effect of 3D Model-Supported Chemistry Teaching on Year 9 Students' Conceptual Understanding of Chemical Bonds and Compound Nomenclature | Ayşegül Aslan, Faik Özgür Karataş |
| 301 | Biology Education with 3D Models: Design Principles and Pedagogical Implications | Ayşegül Aslan, Demet Batman, Ümmü Gülsüm Durukan |
| ID | Title | Authors |
|---|---|---|
| 358 | FDM-Fabricated PLGA 85:15 Lattices toward Patient-Specific Guided Bone Regeneration | İrfan KAYMAZ, Osman YAZICI, Osman YAVUZ |
| 283 | Circular economy in healthcare: recycling ABS for 3D printed medical devices fabrication | Mattia Mizzotti, Mattia Sagliocco, Alberto Bevilacqua, Nada Khaled Mansour, Paolo Oliva, Davide Somma, Simone Micalizzi |
| 292 | Validation of a Synthetic Skin Construct for Topical diffusion Studies Using AP-MALDI-MSI | Federica Potere, Beatrice Purghè, Tommaso Poletto, Nada Khaled Mansour, Simone Micalizzi, Salvatore Piscuoglio, Paolo Oliva, Francesco De Gaetano, Lavinia Morosi |
| 299 | Analysis of thermal conductivity for 3D printable materials using FFF and MSLA technology | Bogdan Grămescu, Andrei latagan, Güner Erdoğan, Şerban Stănescu |
| ID | Title | Authors |
|---|---|---|
| 303 | Evaluating the Effects of 3D Model-Based Instruction on Students' Learning Outcomes: The Topic of Solar and Lunar Eclipses | Gizem Nur MEMİŞ, Emine DALCAN, Ümmü Gülsüm DURUKAN |
| 354 | Multi-Source Earth Observation Analysis Of Built-Up Surface Transformation Around Ulucak Höyük: Implications For Archaeological Site Conservation And Management | Burcu Funda Ayberkin, Barış Ayberkin |
| 357 | Digital Elevation Model-Based Analysis of Greenhouse-Related Visual Exposure at Archaeological Sites: The Case of Letoon | Burcu Funda Ayberkin, Barış Ayberkin |
| 316 | Digital Modeling and 3D Printing for Representing of the Topography and Architectural Fragments of Antalya's Ancient Cities | Nur Uyanik, Kerim Cetinkaya, Tolga Palandiz, Tugba Erdil Dincel, Aysenur Karatas, Sema Kirici, Derya Duzguntop |
| Time | Programme |
|---|---|
| 09:00 – 10:00 | Online Scientific Sessions VI |
| 10:00 – 10:15 | Break |
| 10:15 – 11:15 | Online Scientific Sessions VII |
| 11:15 – 12:45 | Lunch Break |
| 12:45 – 13:45 | Online Scientific Sessions VIII |
| 13:45 – 14:00 | Break |
| 14:00 – 15:00 | Online Scientific Sessions IX |
| 15:00 – 15:30 | Closing Session |
| ID | Title | Authors |
|---|---|---|
| 230 | Effect of Layer Thickness and Printing Temperature on Dimensional Accuracy of 3D Printed PET-G Parts | Tugay Altundas, Burak Ozel, Altug Bakirci, Fatih Ates, Emre Demirci |
| 231 | Tensile Behavior of Hybrid PLA/PLA-CF Composite Structures Produced by 3D Printing | Tugay Altundas, Fatih Ates, Altug Bakirci, Emre Demirci |
| 238 | Effects of FDM Processing Parameters on the Hardness Performance of Carbon Fiber-Reinforced PLA Composites | Batuhan Yetişir, Mustafa Öncül |
| 298 | Effect of Short Glass Fibre Percentage on Tensile Strength of Polymer Composites Manufactured with Masked Stereolithography | Mustafa Hakan Sandık, Ali Can Kaya, Birgül Aşçıoğlu Temiztaş |
| 364 | Tensile Strength Analysis of AZ91 Magnesium Alloy-PLA Composite Single-Lap Joints Formed with Graphene-Reinforced Adhesive | Filiz Karabudak, Selahattin Budak, Fatih Alibeyoğlu, Arif Balcı, Fatih Şenaslan |
| ID | Title | Authors |
|---|---|---|
| 234 | Comparative Analysis of the Mechanical Reliability of Portable Information-Protected (Crypto) Radio Station Housings Manufactured using the Fused Deposition Modeling (FDM) Method | Serhii Holdobin, Alla Kudriavtseva, Myroslav Pohasii, Natalia Brynza, Vadym Tiutiunyk |
| 378 | Degradation of Mechanical Properties of Polylactic Acid (PLA) Test Vehicle After Water Absorption | Jeffry joy, Amalu Emeka, Nebo Sunday |
| 370 | Effect of Post-Processing Treatments on the Surface Properties of Laser Powder Bed Fusion CoCrW Alloy: Roughness, Microhardness and Wettability | Cengiz Burak Şenyurt, Hikmet Ayberk Güngör, Binnur Sağbaş |
| 237 | A Hybrid Taguchi and D-Optimal Approach to Minimizing Surface Roughness in Additively Manufactured PLA-Wood | Batuhan Yetişir, Mücahit Osman Türkan, Mustafa Öncül, Melih Savran |
| ID | Title | Authors |
|---|---|---|
| 247 | ML-Driven Thermomechanical Analysis of Rotating Hybrid Composites | Hüseyin Kayıran |
| 294 | Seismic Performance Evaluation of an Irregular G+10 Shopping Mall Using ETABS and Machine Learning | Kritish Dutta, Rajarshi Gupta, Serra Aksoy, Pushan Kumar Dutta |
| 322 | FEA and XGBoost Based Parametric Optimization of a Heavy-Duty Vehicle King Pin | Hilmi Saygin SUCUOGLU, Hilmi Berkay SAKALLI, Ismail BOGREKCI, Pinar DEMIRCIOGLU |
| 355 | Comparative Performance Analysis of RSM and GPR Surrogate Models for Diameter Optimization in Cogeneration Exhaust Systems | Kursat Tanriver, Mine Ak, Arif Solmaz |
| 272 | Symbiotic Intelligence and Digital Twins: Rethinking the Architecture of Generative AI Systems | Pushan Dutta, B. V. V. Siva Prasad, Ratna Raju Mukiri, Gnanendra Kotikam |
| ID | Title | Authors |
|---|---|---|
| 323 | FEA Driven XGBoost Surrogate Modeling for Rapid Design Validation of Additively Manufactured Spur Gears | Hilmi Saygin SUCUOGLU, Ayse Pelin YILMAZ, Pinar DEMIRCIOGLU, Ismail BOGREKCI |
| 325 | XGBoost-Based Surrogate Modeling for Parametric Design and Pre-Manufacturing Validation of Shouldered Shafts | Hilmi Saygin SUCUOGLU, Ayse Pelin YILMAZ, Pinar DEMIRCIOGLU, Ismail BOGREKCI |
| 295 | 3D-Printed Geological Models from CT-Scanned Sedimentary Cores: Applications in Education, Reservoir Simulation, and Digital Twin Development | Pushan Kumar Dutta, Serra Aksoy, B. V. V. Siva Prasad, P. Rajsekhar Reddy, Sandeep Agarwalla |
| 302 | Analytical Investigation of Thermo-Elastic Stresses and Radial Displacements in Aluminum 6061-T6 and Gray Cast Iron Rotating Cylinders under Various Temperature Distributions | hüseyin fırat kayiran |
| 317 | Dynamic Simulation of Thermal Decay and Interlayer Fusion Time in FDM Additive Manufacturing Using MATLAB/Simulink | Ebuzer Aygül, Salih Çolakoğlu |
| ID | Title | Authors |
|---|---|---|
| 248 | Design and Implementation of a Personalized 3D Food Dosing Unit and Food Extruder | Taner AKKAN, Mehmet Süleyman ÜNLÜTÜRK, İlhan SOFUOĞLU, İlke ÖZTÜRK |
| 246 | Micro-Wire Arc Additive Manufacturing Methods to Create "Perfectus Ingenium" | Serap ÇELEN |
| 254 | Structural Analysis and Parametric Optimization of C5 Corvette Lower Control Arm via Closed-Cellular Structures | Kadir Sefa TURFAN, Doğan ACAR |
| 340 | Redesign of a Control Fixture via Topology Optimization and Manufacturability Using the MSLA Method | Canan Pehlivan, Betül Gülçimen Çakan |
| ID | Title | Authors |
|---|---|---|
| 324 | Numerical Evaluation of TPMS-Based Internal Architectures for Lightweight FDM Components under Multi-Axial Loading | Hilmi Saygin SUCUOGLU, Kerem TAN, Ismail BOGREKCI, Pinar DEMIRCIOGLU |
| 256 | Toward Resilient Distributed Additive Manufacturing Networks: A Flow-Based and Multi-Agent Research Framework | Stanislav Pohorielov, Oleksii Yanovskyi |
| 326 | Numerical Evaluation of TPMS-Based Lightweight Spur Gear Architectures under Single-Tooth Loading | Hilmi Saygin SUCUOGLU, Kerem TAN, Ismail BOGREKCI, Pinar DEMIRCIOGLU |
| 285 | Local-to-Global Buckling Transition in FDM-Printed Thin-Walled Tubes | Mehmet EKER |
| ID | Title | Authors |
|---|---|---|
| 353 | Investigation of the Effect of Blade Angle Variation on Axial Fan Performance Using Computational Fluid Dynamics: Comparison of an Alternative Design with the Original Design | Sevda Şimşek Uzun, Kürşat Tanrıver, Sude Berrak Altuntaş, Elif Ataş, Adem Alkan |
| 350 | A Full-Field Structured-Light 3D Scanning Workflow for Dimensional Digitisation and Quality Assessment of Fused Deposition Modelling Parts | Onat Halis Totuk |
| 342 | Calibration of a Magnetostrictive Level Gauge for Liquid Level Control | Parakhat Matyakubova, Lala Bekirova, Kholmurodjon Muminov |
| 343 | Contactless Liquid Level Monitoring Using Laser-Optical Methods with Component Selection and Error Suppression Due to Medium Vibrations | Parakhat Matyakubova, Lala Bekirova, Lazizbek Saidaripov, Mirolim Mahmudjonov |
| 344 | The State Primary Standard for the Unit of Plane Angle and Ensuring the Uniformity of Angular Measurements | Parakhat Matyakubova, Mirolim Mahmudjonov |
| ID | Title | Authors |
|---|---|---|
| 345 | Modern Methods of Determining the pH Value in Various Research Objects | Parakhat Matyakubova, Nataliya Sheina |
| 346 | Optimization of Electrostatic Desalter Geometry using CFD Coupled with Experimental Validation | Parakhat Matyakubova, Lala Bekirova, Nataliya Sheina, Muborak Mirshomilova |
| 243 | 3D-Printed Hand-Operated Generator as an Autonomous Power Source for IoT Information Transmission Systems | Stanislav Milevskyi, Sergii Kibitkin, Olha Tiutiunyk, Olga Vilkhivska |
| 257 | A 3D-Printed Platform for Fiber-Optic Speckle-Based Contact Sensing: Concept, Dataset Protocol and Machine Learning Prospects | Oleksandr Melnychuk, Stanislav Pohorielov |
| 289 | Smart Nanosensor Systems for Environmental Monitoring in Digital Industry | Gunay Hasanova, Lala Bakirova, Parakhat Matyakubova |
| ID | Title | Authors |
|---|---|---|
| 306 | Functional Design of Additively Manufactured Customized Core Patterns for Sandwich Structures and Evaluation of Their Performance | Kutay EREN, Samet AKAR, Nurullah CANBOLAT, İsmet ÖZTÜRK, Yakup Seçkin KOÇ, Dursun MERİÇ, Tevfik MELHEM, Altuğ UŞUN, Ömer Necati CORA, Hasan GEDİKLİ |
| 259 | From Nature to Fabrication: 3D-Printed PCL/Pinus sylvestris Biocomposites for Advanced Wound Dressing Applications | Hayrunnisa ÖZER, Büşra MUTLU, Fatma DEMİRCİ, Şeyma DUMAN |
| 288 | Electrospun Patches with Natural Extracts: Mechanical, Antibacterial, and Conductive Studies for Wound Healing Applications | Andrea Rescalli, Simone Micalizzi, Federica Potere Arianna Callera, Nada Khaled Mansour, Rossella Mauro, Luca Pellegrino, Francesco De Gaetano, Roberto Rusconi, Paolo Oliva |
| 368 | Investigation of Photocurable Composites for Innovative Wind Turbine Repair Systems Using DLP as a Test Method | Dawid Kiesiewicz |
| ID | Title | Authors |
|---|---|---|
| 349 | 3D Atölyelerinde Hava Kalitesi Göstergelerinin Düşük Maliyetli Sensörlerle İzlenmesi | Ali KAVURUR |
| 255 | Investigation of Quality Improvement Possibilities for Electric Drives of 3D Printers with Enhanced Magnetic Characteristics | Stanislav Milevskyi, Oleksii Duniev, Sergii Kibitkin, Oleksii Yanovskyi, Myroslav Pohasii |
| 276 | Benchmarking Deterministic Inference Latency Across TinyML Architectures for Rule-Based Industrial Fault Detection | Ishan Bhattacharya, Subhashish Roy, Pushan Dutta, Anirban Mitra |
| 330 | Augmented Reality-Based Inspection for Metal 3D Printed Parts: Integrating CAD Data via ARKit | Emin CANTEZ, Ömer Faruk EFE, Oğuz Alper İSEN, Melis TURKSEVER DAYAL |
| ID | Title | Authors |
|---|---|---|
| 371 | 3D Baskı Atölyelerinde Makine Öğrenmesi Tabanlı PWM Fan Kontrolü | Ali KAVURUR |
| 262 | Design, Structural Analysis, and Additive Manufacturing of a Generatively-Optimized Quadcopter UAV Chassis Using Petg Material Extrusion | Dania RIDA MAKKI HASSAN, Berat Barış Buldum |
| 297 | Water-Type Aware Adaptive Enhancement and Multi-Modal Perception for Robust Underwater Visual Intelligence: An Environmental Context-Driven Framework | Pushan Dutta, Sangramjit Sarkar, Serra Aksoy |
| 348 | Quantum-Inertial Navigation Systems for Autonomous Maritime Platforms Using Distributed AI Agents | Nataliia Punchenko |
| ID | Title | Authors |
|---|---|---|
| 269 | Federated Data and Model Parallelism for Privacy-Constrained Neural-Network Training in Distributed Additive Manufacturing | Pushan Dutta, Serra Aksoy, B. V. V. Siva Prasad, P. Rajsekhar Reddy, Dasu Vamana Ravi Prasad |
| 274 | Enhancing Controllability and Temporal Network Robustness in Federated Social Internet of Things Networks: A Manufacturing Perspective | Pushan Kumar Dutta, Serra Aksoy, B. V. V. Siva Prasad, C. Dastagiraiah, K. V. Panduranga Rao |
| 270 | Hierarchical AI-Integrated Management Model for Digital Media: A Framework for Intelligent Retrieval, Rights Governance, and Preservation Readiness | Pushan Dutta, B. V. V. Siva Prasad, Jhansi Vazram Bolla, P. V. S. Siva Prasad, Akash Bag |
| 271 | CIROD: Explainable Insider-Risk Orchestration with Behavioural AI, Evidence-Grounded LLM Reasoning, and Adaptive Cyber-Deception | Pushan Dutta, B. V. V. Siva Prasad, C. Dastagiraiah, Kamalakar Ramineni |
| ID | Title | Authors |
|---|---|---|
| 287 | Sedimentary Rock-Derived Filament Composites for Additive Manufacturing: Mechanical Performance and Industrial Application Potential | Pushan Dutta, Subhra Mullick |
| 296 | Sedimentary Aluminosilicate Geopolymers for Large-Format 3D Construction Printing: A Provenance-Informed Review and Research Framework | Pushan Kumar Dutta Dutta, Subhra Mullick, Serra Aksoy, Vugar Abdullayev |
| 369 | Innovative 3D-printed connectors for heat recovery systems made of thermally insulating composite light-curing resins, for use in the thermal modernization of buildings in EU countries | Szymon Żydowski, Maciej Pilch, Joanna Ortyl |
| 372 | Development of Sodium Silicate Coated Mycelium-Hemp Biocomposites via 3D-Printed Honeycomb Molds: Thermal and Morphological Characterization | Mustafa Selçuk GİRGİNER, Ali TEMİZ, Özge Nur ERDEYER, Mustafa ASLAN, Gaye KÖSE DEMİREL |
| ID | Title | Authors |
|---|---|---|
| 361 | Evaluating FinOps-AIOps convergence in digital banking AI infrastructure: A multi-site study of cost efficiency, reliability, and governed automation | Pushan Dutta, Serra Aksoy, P. Rajasekhar Reddy, Asma Tahseen, Md. Imtiyaz Ali |
| 244 | Theoretical aspects of cybersecurity for portable ECG devices during the wireless transmission of medical data | Serhii Yevseiev, Oleksandr Kushnerov, Stanislav Milevskyi, Vladyslav Sokol, Sergii Dunaiev |
| 267 | Additive Manufacturing Across Industrial Contexts: Process-Material Coupling, Optimisation, and Scalable Qualification | Pushan Dutta, Serra Aksoy, B. V. V. Siva Prasad, Venkata Reddy Medikonda, P. Rajsekhar Reddy |
| 347 | Triple Transformation in Additive Manufacturing Industry: Management Strategies for Micro-Level Firms | Misra Cakaloglu |
| ID | Title | Authors |
|---|---|---|
| 273 | Al-Orchestrated Additive Manufacturing for Sustainable Energy Infrastructure: A Layered Design-Science Framework | Pushan Dutta, Serra Aksoy, B. V. V. Siva Prasad, Venkata Reddy Medikonda, Bhavya Varma |
| 359 | From Open Finance to Verifiable Transition Finance through Digital MRV | Pushan Dutta, Serra Aksoy, Dasu Vamana Ravi Prasad, Meenakshi Simha, P. Aparna |
| 365 | Metaheuristic Optimization for Lithium-Ion Battery Parameter Estimation: A Comparative Study | Mustafa Asker, Oguz Emrah Turgut, Hadi Genceli, Mert Sinan Turgut |
| 268 | Al-Guided Bioprinting: Evidence Maturity, Validation Gaps, and Translational Pathways for Healthcare Fabrication | Pushan Kumar Dutta, B. V. V. Siva Prasad, C. Dastagiraiah, T. Veeranna |
| ID | Title | Authors |
|---|---|---|
| 360 | Testing How Technical Fidelity and Perceived Transparency Shape Trust in AI-Driven Robo-Advisory Systems | Pushan Dutta, Serra Aksoy, B. V. V. Siva Prasad, R. Sravani, K. Sarvani |
| 366 | PresCAR-Fed: A Privacy-Preserving Prescriptive Cardiovascular Risk Framework Using Federated Tabular Foundation Models and Actionable Counterfactual Optimization | Kalyan Chatterjee, Pratiksha Chakraborty, Mohammad Shahwaz Alam, Suryansh Dev |
| 275 | Making Invisible Labour Measurable: Instrument Design and Simulation-Based Stress Testing of an Invisibility Index for Artisan Production in India | Savitha Rajeev, Pushan Dutta |
| 331 | Artificial Intelligence at the Interface of Food Science and Gastronomy: A Socio-Technical Systematic Review | Gül Damla KILIÇ, Cem Oktay GÜZELLER |